Autosport Seattle in
Seattle Hill (WA)

Distressed and defeated, I had sheared off a bolt in a brand new alternator. I was not only assured that it happens to all of us by Brad, but Terry worked his magic and extracted it right then and there while I waited. On top of that, I was charged very fairly for such immediate service. Autosport will continue getting my business for anything I may require of them.

They left a loose heli-coil insert in my cylinder head after completing a repair which could have destroyed my engine.

Wisdom is the most prominent resident here. I am trusting them with a very rare engine and comfortable doing so.

Brad and the other guys built my JCW R53 Mini Cooper motor about 4 years ago with some parts they helped me get all the parts I need in. (K1 rods, king tri bearings, Wiseco Pistons, ARP everything). They knew I had a schedule to keep and we planned on it for a couple weeks and we're the best to work with. I hope to work with them on my next project!

Ask for Marcus down to earth group of car enthusiast selling exact parts you need for your build. straight up ole faithful of autopart stores

Busy but friendly with very good advice. Got my block back and I could have sworn the threads didn't look that good when I dropped it off.

they did great work. they took some extra time finding a better deal on some parts. once i gave them the okay to do it I got I back within a week. machine work was good and the staff were very nice, and helpful

Awesome service and fast turnaround time. I had a rounded out bolt on my 2008 Triumph Bonneville and they were able to get it out in no time. Definitely recommend if you need a machine shop!

Great place to for automotive parts and information John Maloney is the owner and is a wealth of information Brad and Terry also work there and are quite knowledgeable about anything automotive great parts dept

Do business with this place and they're to notch and years of experience. More experience than I've been alive. They're wonderful people!

When I pulled up and saw they had the MG octagon in the front window, I knew I was going to the right place. I have a '75 MG Midget and this is the only place I bring my engine parts for machine work. Staff is super nice and they specialize in British cars. Honest pricing, very affordable for Seattle. Highly recommend.

They are great! friendly and knowledgeable staff. I don't trust my machine work to anyone else.

I found these amazing humans years ago! The quality of work is amazing, their knowledge, their kindness. Only place I bring my Subaru cylinder heads or engine rebuilds to. ;)!

Autosport is the best! They have helped me so much across the years, most recently they honed out my cylinders on my jetski so I can get it back on the water.
Thanks for everything guys

Fantastic Ballard institution. The quality of the machine work on my Subaru crankshaft is incredible. The tolerances are not only well within spec, they are extremely consistent.

Brad is a gentlemen. He is highly knowledgeable and works hard to get you what you need as fast as possible. Brad is my first stop for all of my bmw needs.

This is THE PLACE to go if you need European parts! Very knowledgeable staff. Have a question? Not sure what you need? Ask Brad! He'll have you fixed up in no time.

Fantastic and knowledgeable staff for older Jaguars and MG's. They can help or advise you on parts or technical issues.

Our # 1 choice for cylinder head work on European vehicles and Diesel trucks. Great communication and very friendly staff!

Great place, were able to turnaround a quick job while I grabbed lunch. Excellent machine shop for your automotive needs.

I needed a part for my 03' 540i, which the dealer didn't have in stock. Called autosport up, gave them the part number, and got a call back in 1.5 hours. They sourced the part, and it was half of the dealers price. I highly recommend autosport, and will definitely be coming back.

If there was one place in this town I would like to last for as long as I am around it would be Autosport. I just love these 3 guys. Knowledgeable, honest, clean hearts, technically correct, deserving, hard working, stand behind their work... They do all my Subaru, VW and motorcycle motor work and always will. And for any British made machine this is the place to go to.

I use Autosport for my motorcycle and automotive machining needs. These guys know their business, from vintage VW engines to 2-stroke motorbikes. All of the guys are friendly and helpful. They do more than just machine your parts; they let you know the tips and tricks on install them so you don't screw up your new parts. The vibe is good; each time I visit there are 2 or 3 customers just hanging out and chatting engines with the Autosport staff. I recommend this shop for custom machining jobs with no reservations.

Have been doing business with Brad and Terry for many years, always provide great service and good pricing, a great team to have on your side.
A pleasure to do business with.

Jeff Malone
Import Autosport, Inc.

One of the best machine shops in the North West. Friendly and helpful staff that provide the best service and machine work. I highly recommend them for any machining services. They also have the tooling and capability to resurface dual mass flywheels. We take all of our customers engines and parts there for work and have had nothing but quality work.
Greg @ S3Designs

I know there's other shops in the world but seriously these's guys are the best. Everything is right...from Brad missing MAYBE 1 day of work in the last 15 years I've been going into this place to the gentleman in the machine shop who gave me a 22r toyota head for free when mine was deemed too questionable for a rebuild. Thanks Autosport -you're the best.

i've been buying parts from the knowledgeable staff at autosport for 20 years.
expert part knowledge, they usually have the part, or can get it within hours.
best place for english/european/import parts.