What clients say about Bumper to Bumper Hartford in Hartford (WI)
They have a full blown machine shop in the back of the store. I took a couple of front spindles in at like 2pm to have new wheel bearings pressed on for the car I’m fixing up for my newly licensed daughter. I wasn’t expecting to get them back the same day, but I barely made it home before they were done. I’m super handy with vehicles and will be using them from now on for any machining needs I have and their prices are fair too.
Excellent parts store. The counter staff are very diligent in finding the exact parts that your auto needs. If by chance they don't have it in stock, they will have it delivered the next day.
Needed to replace the A/C low pressure hose "cap cover"> Cheap plastic piece > hard to find > impossible to inventory. Todd said "give me a minute, it would be way in the back if we have it", NO Snarky look, NO eyeball rolling, NO muttering to other employees.
Returned 5 minutes later with two pieces in hand. "Let's go make sure one fits" as we walked to my car. Todd made sure it fit and charged me $3.54. GREAT EXPERIECE! I'll be back for all my auto needs.
Very nice knowledgeable people have everything you need and have machine shop to get engine and other machine work have been customer for many years thank you alan
I have been doing business with this branch for many years. My belt came off my truck early in the morning before business hours I made it to the store and the manager was there early. He the idler pulleys, belt, tensioner pulley in stock. I was able to get back up and running. I was supposed to help my mom get my dad to the hospital for a chemo treatment, but it all worked out.
I've been going here with my dad since I was 5 whenever he needed parts for his mechanic service. Best prices for parts in Hartford and memorable, iconic staff.
I didn't make a purchase here, I was just helping a friend but I browsed the shop while we waited and was really surprised by the amount of parts/tools/supplies they had in stock. I've seen their work trucks driving through town and always assumed they just did body work. Their selection definitely rivals the 'big' chains and I'll keep that in mind for my projects.
They've also got a machine shop if you need engine work done or brakes turned down.
I had a block built here about a year or so ago and something went wrong after a few 100 miles took it apart to see the wrist pin seized up on a floating wrist pin, and the rod caps to the crank were not in the correct places which fried my crank bearings. If you take your stuff here make sure to double check there work!!
I have found this to be one of the more reasonable shops in Hartford. BUT from my last several experiences, the customer service is very lacking and the employees are not very helpful. If you know exactly what you are looking for, have no questions about your project, and do not care about their lack of open hours, like I said, they have good prices.
Website
