Metal Processors Inc in
-
Rating:
-
Phone:
-
Methods of Payment:
- Credit cards
- Debit Cards
-
Services:Recycling center
-
Website:
-
Zip Code:39455
Working Time and Location
What clients say about Metal Processors Inc in Lumberton (MS)
-
Really bad experience. Best way is to take sullivan road to metal processor after reaching there they told to take W ranklin st to come around on the scale but the best way is to back up directly on the scale rather than going to streets because they are too tights for semis. People are nice over here and i insisted them to make a u turn from there and back up at the scale. Docks are just across the streets. After loading or unloading come back to scale for weight and again back up there. Hope this gonna help because i got stuck at the ranklin street.
Apr 12, 2025 -
Chance of a flat tyre 99 percent . Proceed through the green line, through scale. Third picture is the dock, then go out and return back in the old way via scale, weigh it and park
Jan 12, 2025 -
Truck drivers if you were coming in here take State Street to Rankin street. The insurance you were looking for has a yellow bar gate across it haven't made it in yet but so far they were nice when I ended up on the wrong road
Aug 08, 2024 -
This warehouse is very tight to get in and they damaged my trailer while they unloading it so be careful If you delivering for them also check your trailer inside before you leave their place
Jul 18, 2024 -
This place is tighter than a beetle bugs as! Be very careful how you move around in here. You will tear up your truck. If you don't move slow around in here. Your tear fenders off bust tires. They do unload pretty decent as long as they don't have a line. Advise come early.
Jun 25, 2024 -
Great way to clean up the land and to get paid a little for it.
May 21, 2024 -
On the internet they say they close at 4 I went up there twice this week and it was already closed both time shut the gate wouldn't let us in at 3:45 the man working at the gate very rude
Jul 15, 2022 -
Best place in Jackson for recycling, everyone is very helpful and friendly.
Nov 24, 2020 -
Always good, but if you are scrapping jacketed heavy copper cable, have it rated beforehand. Otherwise you will get the default 40% recovery rate.
Jul 01, 2020 -
I love this place, very friendly people. And I make good money from this place. I'm there so much, I need to get a job there. Thank u guys for being so friendly.
Feb 16, 2019 -
These guys, on several occasions have miss identified my offerings. They often try to label everything as unprepared scrap iron based off electric motors still having small bases on them. They can and will screw you out of cash. Sellers beware.
Oct 03, 2017
Nearest Junkyards to Metal Processors Inc
Want to sell your car?
We will buy your car in any condition:
- Blown Engine
- Burned
- Damaged
- Flooded
- Non Running
- Old
- Salvage
- Scrap
- Totaled
- Used
- Wrecked