What clients say about State Metal Industries in Camden (NJ)
Drivers Do not pick up any load from this location
1800 Albertson Rd
High Point, NC 27260
1-The lady on the front desk so rude
2- You have to get on the scale
3-and drive around to this road get loaded
4- and coming back to the scale
5- please take a look at my truck how your truck I just spend $175 to watch my truck
going to look like this
they’re can do better but improvement than that .and this is how they dropped the aluminum’s inside your trailer to damage it,drivers before you pick up a load you guys should go a creek review about the place do not come in here as a truck driver.
Wasn’t as bad as some of the reviews make it out to be. Yes, there are some deep potholes on the side streets, go slowly and avoid what you can. The rest is all pretty straightforward.
- Make sure your tandems are all the way forward BEFORE you back onto the scale; the scale is small and this is the only way you’ll fit.
- You must BACK onto the scale from the street (scale in, and scale out). It’s no problem really, it’s a wide street, and an industrial area, so people are generally accustomed to trucks being in their way.
- No parking on 2nd St. I wouldn’t particularly recommend parking overnight due to the area, but I would maybe park on Walnut if needed (without blocking the docks).
- Office opens at 7am.
- Heavy load (I picked up aluminum ingots, 43k lbs). Was here about 1.5 hrs because someone was ahead of me.
Don’t forget read signs and keep calm moving. Park on the street than check in and than they told you go to dock , after all go back to check in office and back up to scale (your tandems should to be all the way front ) cause there is small scale ! People working hard and understanding you if you doing some issue ! Lady on check in talking very kindly , nice place !
First park your truck at walnut st. Walk to the office. They call you when dock is available. Scale is too small, so you have to move your tandems all the way forward. Got unloaded in 30-40 mins. Not bad.
I got stuck at kaign Ave with 13 feet ,u turn, n called shipper(Mary) gave me awesome directions to get there. 130 south to 646 to exit 4 then left and pass 2 lights. Turn right at stop sign about 4 blocks is their office(keep driving and on building wall it will say state metal). Walk in n get checked in and then back in to scales and make left left left to go around the building to docks and get loaded. Go back to scales again n get paperwork.
Your time is of no consequence to the employees of this establishment. Woman at shipping office is the kind that’s not satisfied unless you leave here feeling miserable just like she does (poor soul).
I had a delivery here. Read all the comments and was expecting the worst, but there is more than enough room to maneuver. The security guard and lady in the office were cool.
Yes you do need to know how to back up if you’re coming here but there is more than enough room. If you don’t then you’ll leave negative comments like all the other ones.
They have a small scale so slide tandems all the way forward. Unloaded in 45 minutes.
Had a pick up from here. Honestly wasn’t that bad. You park on the street, check in with the office, back into the scale after sliding the tandems all the way forward (it’s a small scale), then circle around the building and wait in line to get in the dock(there is only 1 dock open). After your loaded you go back around and back into the scale again and get your paperwork. The bad things are somewhat rude staff, and pot holes galore. Other than that not too bad.
Too tight place. Have to do scale first. For that have to do backup from the street. Then go all the way back to the dock on the other side of the building. Loading takes almost 1.5 Hrs . After that again do backup on the scale.No overnight parking. No clean restrooms.
I have sold all my scrap aluminum and scrapped aluminum mag wheels for the last 14 years here because it's an aluminum mill and pays the highest prices. But you have to know everything is weighed on a tractor trailer scale so you need over 100 lbs aluminum to sell there. Also you may have to wait for 30 minutes or an hour until the tractor trailer scale is available for you to come in.
Place is horrible have to back in off street with only one lane open due to construction and you have do that twice plus there is massive pot hole everywhere
Website
